2022-23 Balloons

OVERSIZED

Solid-colored MagicArch™ Cloverleaf Modules

• Allows four balloons to be in ated simultaneously • Consistent in ated size: 16" = 3.875"H × 16"Diameter 30" = 7.8"H × 29.5"Diameter (air- or helium- lled) • Assemble a 24-foot arch in minutes • Remains in ated for up to 10 days • Use thin nylon cord,

ribbon, or string– no mono liment.

Image courtesy of Anagram International Inc., Minneapolis, MN.

30" 16"

BALLOON ARCH Supplies: • Ribbon or string cut to desired arch length + 2' extra • Balloon weights • Wide tape (optional) • MagicArch™ Cloverleaf Modules • Helium

1. Tie one end of the ribbon to a weight or tape ribbon with wide tape to the oor. 2. In ate balloon. 3. Thread the unattached ribbon end through the center of the balloon. 4. Repeat steps 2 and 3. Arch forms automatically.

BALLOON COLUMN Supplies: • Ribbon or string cut to desired column length + 2' extra • Balloon weights • MagicArch™ Cloverleaf Modules • Helium

1. Tie one end of the ribbon to weight. 2. In ate balloon. 3. Thread the unattached ribbon end through the center of the balloon. 4. Repeat steps 2 and 3. Column forms automatically. 5. Finish off with 3' latex or oversized balloon. 6. Attach to ribbon. Trim excess.

Design by burton + BURTON ® .

350

www.burtonandburton.com