AIr-Filled Solutions Floor Display Rack

B

AIR-FILLED SOLUTIONS FLOOR DISPLAY RACK by Edward Muñoz, CBA ®

Supplies

90 Minutes

Qty 15

18" Standard Air-filled Wands

Qty 6

22" Bubbles™ Wands

Qty 6

16" Orbz™ Wands

Qty 1

Floor Display R100

Directions

1. Assemble your R100 Floor Display. 2. Starting with the 6 cylinders at the TOP of the R100 Floor Display, insert approximately 12 of the Orbz™ Wands and/or Bubbles™ Wands; 3 per cylinder. 3. In the remaining cylinders, insert 4-5 per cylinder of the Standard Air-filled Wands. 4. Survey the display from all angles and adjust the balloons, as necessary. 5. Keep the display fully stocked at all times.

www.burtonandburton.com

R1017_ACME_2019

Copyright © 2019 burton + BURTON ® . All rights reserved. burton + BURTON ® cannot be responsible for any typographical errors or omissions. The liability of burton + BURTON ® for defective merchandise is limited to the replacement of said merchandise, not any losses incurred due to the failure of the product. Products featured may hold either licensed trademarks or trademarks owned by burton + BURTON ® . Build time contingent on proper equipment usage and skill.